JensenTools
Siglent
Siglent

Siglent SAP2500 Active Probe, Single-Ended, SAPBus Interface, 10X, 2.5 GHz, 1.1 pF, 1 MOhm

Our Part #45416.1

Condition:New

Mfr Part #SAP2500

Siglent SAP2500
Siglent
Siglent

Siglent SAP2500 Active Probe, Single-Ended, SAPBus Interface, 10X, 2.5 GHz, 1.1 pF, 1 MOhm

Our Part #45416.1

Condition:New

Mfr Part #SAP2500

$1,689.00EACH

SAP2500 Active Probe

Features:

  • Single-ended (uses instrument ground. Not differential)
  • SAPBus interface for use with SIGLENT SDS5000X and SDS6000A oscilloscopes
  • Bandwidth (probe only) 2.5 GHz
  • Bandwidth (with scope) 1 GHz(SDS5104X), 2 GHz(SDS6204A)
  • Input capacitance 1.1 pF
  • Input resistance 1 Megohm
  • Offset range +/-12 V
  • Attenuation ratio (DC) 10x
  • Offset accuracy < 3%
  • DC gain accuracy < 3%
  • Input dynamic range +/-8 V
  • Maximum input voltage (Non-destructive) 20 V
  • Cable length 130 cm

Includes accessories:

  • 5pcs Straight Tips
  • 5pcs Pogo Tips
  • L-In Adapter
  • Z-Ground
  • Y Lead Adapter
  • Right Angle Pin Lead 5cm
  • Straight Pin Lead 6cm
  • Right Angle Pin Lead 10cm
  • Straight Pin Lead12cm
  • Channel ID Clips (Set of 4 colors)

The SAP1000 and SAP2500 are compact, high-impedance active probe designed to meet today's increasing demand for measurements on a variety of test points. With low input capacitance and high input resistance, circuit loading is minimized. With the SAPBus interface, the SAP1000 and SAP2500 become an integral part of the oscilloscope. The probe can be controlled from the oscilloscope's front panel. The oscilloscope provides power to the probe, so there is no need for a separate power supply or batteries.


Brand: Siglent
Bandwidth: 2.5 GHz
Attenuation: 10X
Input Capacitance: 1.1 pF
Max Input Voltage: 12 V
Input Impedance: 1 MΩ
Interface: SAPBus
Cable Length: 1.3 m
Series: SAP Series
Operating Temperature Range: 5 to 40°C
Series Compatibility: SDS5000X/SDS6000A series
Type: Active Probe
$1,689.00EACH