MS-POE Microscanner Poe Cable Verifier

MicroScanner PoE Capabilities:

• Determine if there's a bad or unconnected cable, insufficient power, or a Powered Device (PD).
• Ethernet Alliance Certified to IEEE-802.3 standards for reliable multivendor interoperability
• Information for the Network Engineer to investigate potential switch configuration or malfunctions.
• PoE Switch Verification – Determine if a switch port can provide enough power by reporting PoE class (0-8).
• Powered Pairs – Graphically identifies powered pairs. Including Dual Signature where the switch port delivers power on 2 or 4 pairs (802.3bt or PoE ++)
• Active Switch Detection - Determine if a cable is connected to a switch port and port speed up to 10G
• Cable Testing – Identify any shorted, open or crossed wires at both ends, length of each pair, and send tones to find cables.
• Validate and troubleshoot your Industrial Ethernet copper cabling
• PoE Injector verification - Display injector voltage level

MS-POE Includes:

• MicroScanner PoE Verifier with MS-POE Wiremap Adapter
• Multi-language Getting Started Guide
• Batteries
• Fluke Networks carry Pouch

The MicroScanner PoE makes testing your PoE based communication cabling fast, easy, and clear. The tester reports the maximum power class the switch can provide under 802.3af, 802.3at, and 802.3bt specifications and displays the 802.3 PoE class (0-8) or the voltage from passive PoE sources. This allows technicians to verify the exact issues that may be affecting a PoE based installation. The MicroScanner PoE also provides information on available services up to 10G Ethernet ensuring that your network is capable of performing to your needs.