- Description
- Specifications
- Documents
HiScroll - The Oil-Free Vacuum Pumps
The HiScroll series consists of three dry scroll pumps with a nominal pumping speed of 6 – 21 m³/h, which are characterized by fast evacuation to atmosphere. Their powerful IPM1 - (synchronous motors with sensorless INFORM® control2) achieve up to 15 % higher efficiency than conventional drives and enable stable low operating temperatures for the pump. They also reduce electricity costs.
Pfeiffer Vacuum PD S10 000 B Features:
6 M^3/hr dry scroll vacuum pump. No hydrocarbons: Completely dry & oil-free Scroll vacuum pump
Low noise level, minimal vibrations and compact design, ideal also for use in laboratories
Safe operation due to the installed non-return valve and hermetically sealed pumping system
Low operating costs thanks to the highest quality, short maintenance times and long maintenance intervals
Power as required: Stable pumping speed and short cycle times
Sustainable: 15% higher efficiency of the drive system, lower heat generation and lower cooling requirements
Intelligent operating modes such as standby mode and interfaces for linking controllers and other Pfeiffer vacuum via RS-485
Simple logistics: Our HiScroll pumps are suitable for all voltages worldwide
Pfeiffer Vacuum PD S10 000 B Product Details:
Pumping speed 6.1 m³/h
Final pressure 1.5 · 10-2 hPa | 1.125 · 10-2 Torr | 1.5 · 10-2 mbar
Ultimate pressure for gas ballast stage 1 7 · 10-2 hPa | 5.25 · 10-2 Torr | 7 · 10-2 mbar
Ultimate pressure for gas ballast stage 2 4 · 10-1 hPa | 3 · 10-1 Torr | 4 · 10-1 mbar
Gas ballast flow stage 1 0.66 m3/h | 0.388 cfm | 11 l/min
Gas ballast flow stage 2 0.96 m3/h | 0.565 cfm | 16 l/min
Integral leak rate 5 · 10-7 Pa m3/s | 6.65 · 10-5 Torr l/s | 5 · 10-5 mbar l/s
Intake pressure max. 1,100 hPa
Exhaust pressure, max. 1,500 hPa | 1,125 Torr | 1,500 mbar
Connection flange (in) DN 25 ISO-KF
Connection flange (out) DN 25 ISO-KF
I/O interfaces RS-485
Input voltage(s) 100 – 127 / 200 – 240 V AC (±10 %), 50/60 Hz
Input voltage: tolerance ±10 %
Rated current consumption 100 V – 127 V: 4 A | 200 V – 240 V: 2 A
Current, max. 10 A
Rotation speed 1 000 – 3 000 rpm
Nominal rotation speed 2,500 rpm | 2,500 min-1
Protection degree IP40 | Type 1
ATEX-certification Ex II 3/-G Ex h IIC T4 Gc X +5 °C ≤ Ta ≤ +40 °C
Certification Semi S2 compatible |Semi S8 compatible | cTUVus certified according to UL / CSA 61010-1
Switch Yes
Ambient temperature 5 – 40 °C
Cooling method Air (Forced convection)
Emission sound pressure level (EN ISO 2151) 48 dB(A)
Weight 19 kg | 41.89 lb
Gas ballast Yes
Operating altitude, max. 2,500 m