• Quickly and accurately take resistance measurements with the Warmbier SRM110.
• The LED readout will report the resistance in powers of 10 (example 10¹⁰)
• Indicates if the surface is Insulative, Conductive or Dissipative.
• Test range is 10³-10¹²
• Test voltage is 10V/100V(automatic ranging)
• Accuracy + 5%
• Built-in resistivity probes
• Carrying case & Calibration Certificate Included
• Can be used with the Part Number 410 Mini-Probe to take measurements on small areas.

This SRM 110 from Wolfgang Warmbier uses parallel electrodes and concentric rings to accurately measure RTT, RTG, or resistivity for periodic verification, factory audits or test lab evaluation of product. This meter is designed to verify incoming materials such as floor mats, table mats, bins and shelving in static controlled areas. Work surfaces, bags, wrist straps, footwear, packaging materials, garments, and ESD chairs can also be tested with the device.
The SRM110 meets periodic test requirements per Compliance Verification ESD TR53 and conforms to ANSI/EOS/ESD (S4.1, S7.1, S12.1, S2.1).