Teledyne LeCroy PP007-WR-1 10:1 500 MHz Passive Oscilloscope Probe

• Compact probe head
• Supports fine pitch SMD probing
• Rugged, sharp tip
• HF optimized connection accessories
• Over 30 accessories
• Low input capacitance
• Attenuation Ratio 10:1
• 500 MHz bandwidth
• Maximum Voltage 400 V
• Input Capacitance 9.5 pF
• Input Resistance 10 MΩ
• Cable Length 1.2 m
• BNC Interface

The PP007 embodies leading technology in passive probe design. The small probe is optimized for maximum waveform fidelity, including high frequency signal components, in a rugged probe suitable for every day.

The sharp probe tip* is spring loaded, allowing it to retract into the narrow probe head. The tip does not slip off the object being probed-important when probing small geometry surface-mounted components. Probing dense circuits is easier with the small 2.5 mm ground sleeve, which provides much better visibility than 5 mm and 3.5 mm probes. * A rigid tip is also available

Ease in Probing SMT Circuits

In addition to the small probe head size, the PP007 is augmented with several accessories to simplify probing dense surface mounted circuit assemblies. Insulating probe caps with guide fingers (PK007-009, 010, 011, 012) keep the small probe tip centered on the IC lead and prevent it from shorting to adjacent leads. The IC Caps are supplied in a range of sizes designed for IC lead pitches from 0.5 mm through 1.27 mm. Optional accessory kits contain 0.5 mm micro clips for attaching to the smallest IC leads, along with adapter leads to connect to the probe tip.

Rugged Probe for Everyday Use

Unlike some probes, the PP007 does not trade off physical robustness to obtain excellent high frequency performance. The probe will stand up to the rigors of everyday use. The probe has a working voltage rating of 400VCAT I with transient surges up to 1250 V. The PP007-WR is designed to be used with the WaveRunner 6000 series

• Sprung Hook
• Standard Ground Lead
• Adjustment Tool
• Rigid Tip, 0.5mm
• Spring Tip, 0.5 mm
• Insulating Cap
• IC Cap 0.5 mm pitch (green)
• IC Cap 0.65 mm pitch (blue)
• IC Cap 0.8 mm pitch (gray)
• IC Cap 1.0 mm pitch (brown)
• IC Cap 1.27 mm pitch (black)
• Color Coding Rings (set)
• Ground Blade
• Ground Spring
• Copper Pad
• PCB Adapter