Teledyne LeCroy PP005A 10:1 500 MHz Passive Oscilloscope Probe

• Attenuation Ratio 10:1
• 500 MHz bandwidth
• Maximum Voltage 600 V
• Input Capacitance 11pF
• Input Resistance 10 MΩ
• Cable Length 1.2 m
• BNC Interface

Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes is designed to handle voltages of at least 400V, some as high as 600V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input. The PP005A is a 500 MHz 10 MOhms Passive Probe with 10x attenuation.

• Trimming Tool
• Sprung Hook (Black)
• IC Insulating Tip (Black)
• Tip Protector)
• Ground Lead (11 cm)
• Ground Lead Short on Probe Tip
• BNC Adapter
• Probe Tip
• Spring Contact Tip (0.8)
• Spring Contact Tip (0.38)
• Instruction Manual