JensenTools
Protektive Pak
Protektive Pak

Protektive Pak 39800 Pro Mat, Female Snaps 23-1/2 x 59-1/2 x 1/16 in

Our Part #211MU633

Condition:New

Mfr Part #39800

Protektive Pak 39800
Protektive Pak
Protektive Pak

Protektive Pak 39800 Pro Mat, Female Snaps 23-1/2 x 59-1/2 x 1/16 in

Our Part #211MU633

Condition:New

Mfr Part #39800

$28.63EACH
  • In stock - will ship in 3 days or less
  • Solid fiberboard construction with a buried conductive layer
  • Includes two installed 3/8 inch stud snaps - socket snaps available
  • Resists damage by hot soldering irons, solder, or flux
  • RTT of top and bottom layers: 1 x 10⁶ to < 1 x 10⁹ ohms - meets worksurface recommendation of ANSI/ESD S4.1
  • Thickness: 0.060 inch (1.5mm)
  • Lead-free RoHS compliant
  • Made in the United States of America

The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point. ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 X 10⁹ ohms. If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10⁶. Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration. (Ref: TR 20.20 section 5.3.1).

BrandProtektive Pak
Thickness1/16"
Width59-1/2"
Length23-1/2"
Common Point GroundingYes
Cord and Snap IncludedYes
Length 123-1/2”
Size23-1/2" x 59-1/2"
Snap StyleFemale
$28.63EACH