$21.58EACH
Qty: | Price: | Savings |
---|---|---|
1 | $21.58 | |
10 | $21.15 | Save 2% |
50 | $20.72 | Save 4% |
100 | $20.52 | Save 5% |
- Description
- Specifications
- Documents
- In stock - will ship in 3 days or less
- Solid fiberboard construction with a buried conductive layer
- Includes two installed 3/8 inch stud snaps - socket snaps available
- Resists damage by hot soldering irons, solder, or flux
- RTT of top and bottom layers: 1 x 10⁶ to < 1 x 10⁹ ohms - meets worksurface recommendation of ANSI/ESD S4.1
- Thickness: 0.060 inch (1.5mm)
- Lead-free RoHS compliant
- Made in the United States of America
The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point. ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 X 10⁹ ohms. If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10⁶. Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration. (Ref: TR 20.20 section 5.3.1).
Brand: Protektive Pak
Thickness: 1/16"
Width: 35-1/2"
Length: 23-1/2"
Common Point Grounding: Yes
Cord and Snap Included: Yes
$21.58EACH
Qty: | Price: | Savings |
---|---|---|
1 | $21.58 | |
10 | $21.15 | Save 2% |
50 | $20.72 | Save 4% |
100 | $20.52 | Save 5% |