• Continuously monitors the path-to-ground integrity of one operator and one ESD work surface
• Monitors for a worksurface path-to-ground of less than 10 MΩ
• Mounting tabs make it suitable to install in workbench or equipment settings
• Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and monitor’s jack is intermittent
• Mat monitor switch disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
• Audible alarm adjustment sets the audible alarm volume from loud to louder
• Wave Distortion Technology provides stable continuous monitoring (versus pulse or intermittent) of the wrist strap’s path-to-ground and the presence of its 1 MΩ safety resistor
• Disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm
• Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
• 1.2V operator test voltage reduces the risk of electrical overstress (EOS) for the handling of sensitive components
• ˂50 millisecond alarm response time identifies failures and intermittencies that inferior technologies miss
• Continuous visual and audible alarms by illuminating green to indicate proper grounding; illuminates red and
• sounds an audible alarm when intermittent or failed connection occurs
• National Institute of Standards and Technology calibrated with certificate included
• Includes 100-240VAC safety certified power adapter with North American Plug

In The Box

• 1 Multi-Mount Monitor
• 1 Mat Monitor Cord (White)
• 1 Countersunk Washer
• 1 Flat Head Screw, 6-23 x 1/4"
• 2 Pan-Head Screws, #6 x 3/8”
• 1 Dual Lock Fastener Set, 2” Length
• 1 Power Adapter, 24 VDC, North America Plug
• 1 Certificate of Calibration