JensenTools
Pico Technology
Pico Technology

Pico Technology TA095 Single-Axis IEPE Accelerometer, 0.5 Hz to 10 kHz, 3m Long

Our Part #51132.1

Condition:New

Mfr Part #TA095

Pico Technology TA095
Pico Technology
Pico Technology

Pico Technology TA095 Single-Axis IEPE Accelerometer, 0.5 Hz to 10 kHz, 3m Long

Our Part #51132.1

Condition:New

Mfr Part #TA095

CA Prop 65
$419.00EACH
Calif. Prop 65

TA095 Single-Axis IEPE Accelerometer

The TA095 is a single-axis IEPE accelerometer that is suitable for use in a wide range of applications. It can be used with any suitable device that provides a constant-current IEPE power source, such as the PicoScope 4224 IEPE.

Kit PP697 Contains: TA095, a calibration certificate and an introductory guide.

Technical Specs:

  • Sensitivity (± 15%): 10.2 mV/(m/s2)
  • Measurement range: ± 490 m/s2
  • Frequency range: 0.5 Hz to 10 kHz
  • Non-Linearity: ± 1%
  • Transverse Sensitivity: ≤ 7%
  • Settling Time (within 1% of bias): ≤ 2.0 sec
  • Discharge Time Constant: ≥ 0.3 sec
  • Excitation Voltage: 18 to 28 VDC
  • Constant Current Excitation: 2 to 20 mA
  • Output Impedance: <150 Ohms
  • Output Bias Voltage: 8 to 12 VDC
  • Spectral Noise (10 Hz): 78.5 (micrometre/s2)/sqrtHz
  • Spectral Noise (100 Hz): 49.1(micrometre/s2)/sqrtHz
  • Spectral Noise (1 kHz): 39.2 (micrometre/s2)/sqrtHz
  • Electrical Isolation (Case): >108 Ohms

Enviromental Specs:

  • Overload Limit (Shock): 49 050 m/s2 pk
  • Temperature Range: -54°C to +121°C
  • Enclosure Rating: IP68

Physical Specs:

  • Size (Hex x Height): 14 mm x 64 mm
  • Weight (with cable): 99.3 g
  • Mounting: Stud
  • Mounting Thread: 1/4-28 Female
  • Mounting Torque: 2.7 to 6.8 Nm
  • Sensing Element: Ceramic
  • Sensing Geometry: Shear
  • Housing Material: Stainless Steel
  • Sealing: Molded
  • Electrical Connector: Molded Integral Cable
  • Electrical Connection Position: Top
  • Cable Length: 3 m
  • Cable Type: Polyurethane

Brand: Pico Technology
Alternate Product Number: PP697
$419.00EACH