JensenTools
ACL Staticide
ACL Staticide

ACL Staticide ACL 395 Surface Resistivity Meter

Our Part #106ST395

Condition:New

Mfr Part #ACL 395

ACL Staticide ACL 395
ACL Staticide
ACL Staticide

ACL Staticide ACL 395 Surface Resistivity Meter

Our Part #106ST395

Condition:New

Mfr Part #ACL 395

$595.95EACH
Qty:Price:Savings
1$595.95
2$566.15Save 5%
5$536.36Save 10%
  • Accuracy: ± 0.25 decade in the dissipative range
  • TestVoltage: 10 volts at values less than 10⁶
  • 100 volts at values of 10⁶ and greater
  • Resistivity limits: 10³ - 10¹² ohms per square
  • Resistance limits (when using external probes): 10³ - 10¹² ohms
  • LED colors: green 10³ - 10⁶, yellow 3 x 10⁶ - 10⁹, orange 3 x 10⁹ - 10¹⁰, red 10¹ - 10¹²
  • Conforms to ASTM D257
  • Includes calibration certificate

The ACL 395 meter features circuitry that produces higher accuracy than other pocket-sized meters. This allows for the same advantages as megohmmeters, but at an economical price. Colored “warning” stage alerts the auditor to material approaching the upper end of the dissipative scale, so that it can be designated as nearly out of specification. Features conductive rubber rails for the best contact possible. This yields higher accuracy when assessing packaging and assembly lines using the parallel resistivity probe method ASTM D257. Optional 5-lb probes (part no. 480-694) are used, this meter will comply with IEC 61340-4-1, ANSI/ESDA S4.1 & ANSI/ESDA S7.1 for RTG and RTT testing, making it ideal for auditing in ESD production areas and laboratories.

BrandACL Staticide
Certificate of CalibrationYes
Display TypeLED
Measuring RangeResistivity limits: 10³ to 10¹² ohms per square, Resistance limits (when using external probes): 10³ to 10¹² ohms
ApplicationsThe ACL 395 meter can be used in all facets of material production including engineering, maintenance, quality control, incoming inspection, manufacturing and research departments for the testing of anti-static mats, floor finishes, paints, wrist straps,
IncludesTester, two cables, 9-volt battery, case, and calibration certificate.
NoteOptional external 5-lb probes to measure resistance in ohms test. When the optional 5-lb probes are used, this audit kit will comply with IEC 61340-4-1, ANSI/ESDA S4.1 & ANSI/ESDA S7.1 for RTG and RTT testing making it ideal for auditing in material produ
$595.95EACH
Qty:Price:Savings
1$595.95
2$566.15Save 5%
5$536.36Save 10%